Price: $11.88
(as of Jun 23, 2024 20:37:03 UTC – Details)
Hand-cranked grinder adjustment small knowledge
◆Please remove the nut, rocker handle and L-shaped holder in the center of the grinder.
◆Lift the center screw in one hand and gently rotate the gear nut piece to a slightly tighter direction in the clockwise direction. Please be careful not to screw too tightly.So as not to damage the internal structure of the machine.
◆Pull back the L-shaped retainer, the long end of the retainer catches the groove of any one of the gear-shaped nut pieces, and uses this as the zero mark of the grinding degree.
◆Think of a groove in the gear-shaped nut piece as a grid.
◆Rotate the gear nut pieces 2 to 5 in a counterclockwise direction, and the grinding thickness is suitable for the espresso machine and the mocha coffee pot.
Rotate the gear nut pieces 6-8 in a counterclockwise direction, and the grinding thickness is suitable for American coffee machines, hand punches and filter coffee makers.
Rotate the gear nut pieces 9 to 11 in a counterclockwise direction, and the grinding thickness is suitable for the espresso coffee maker (syphon pot).
◆Grinding thickness can be fine-tuned according to personal taste and brewing habits. The above description is for reference only.
◆After adjusting the degree of grinding, put the rocker handle and nut in sequence and tighten them to start grinding the beans.
Package:
1* Coffee grinder
1* Package box
1* Small brush
Ⅰ, Retro style, wood seat, exquisite appearance, very suitable for a gift to your loved ones; homemade coffee lovers; coffee shop display of ground coffee beans.
Ⅱ, Adjustable mode, turn the gear nut piece at the bottom, the more the gap is tightened, the thicker the ground coffee powder, the smaller the gap is, the smaller the coffee powder is.
Ⅲ.The hand grinder is easy to operate, just set the required grinding gear, pour the coffee beans into the ceramic core, and the drawer is designed for the magnet, making it easier and faster to operate.
Ⅳ.The handle should never be idling or counterclockwise, which can easily damage the pottery mill. Too tight tightening (right-turning) of the nut that adjusts the thickness will make the mixing difficult, which is the cause of the failure of the grinder.
Ⅴ.We have perfect customer service, we promise that the product has any quality problems within 12 months, we can provide replacement or refund, if you have any questions, please contact us, we will solve the problem in the first time.
